 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| C1300 Typical Applications Base Stations Test Equipment Telecom & Wireless Infrastructure Digital Switching Military and Avionics PXO Features 9X14 J Leaded Surface Mount Package Reflow Process Compatible ACMOS, TTL and LVPECL Class B Screening optional Military Operating Temperature Range Optional Previous Corning Model Numbers Frequency range MC042, MC342, MC036 and MC037 1.0 to 800.0 MHz (ACMOS/TTL available up to 125 MHz. PECL and LVPECL frequencies above 220 MHz are achieved through use of PLL multiplier) Standard frequencies Frequency stabilities1 Parameter vs. operating temperature range (Referenced to +25C) Min -100 -50 -25 -15 -100 -50 -25 -50 -100 -100 Typ 19.44, 32.768, 44.736, 51.84, 77.76, 155.52, 622.08 MHz Overall tolerance (vs. initial accuracy, op. temp. range, vs load, vs supply, vs 1 year aging) st Max. +100 +50 +25 +15 +100 +50 +25 +50 +100 +100 Units ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm Operating temp range 0 +70C 0 +70C 0 +70C 0 +70C -40 +85C -40 +85C -40 +85C -55 +125C -55 +125C -0 +70C Ordering Code C104 C505 C255 C155 F104 F505 F255 M505 M104 C104 5 7 Parameter Initial tolerance Supply voltage change vs. load change vs aging /1 Year vs. aging / year (following Years) -50 -25 -20 -100 -50 -25 -65 -100 Min -15 -25 -50 -100 -2 -1 -3 -1 Typ +50 +25 +20 +100 +50 +25 +65 +100 Max. +15 +25 +50 +100 +2 +1 +3 +1 ppm ppm ppm ppm ppm ppm ppm ppm Units ppm ppm ppm ppm ppm ppm ppm ppm 0 +70C 0 +70C 0 70C -40 +85C -40 +85C -40 +85C -55 +125C -55 +125C Condition @ 25C @ 25C @ 25C @ 25C VS 5% Load 5% C505 C255 C205 F104 F505 F255 M605 M104 Ordering Code T155 T255 T505 T104 5 Vectron International, LLC 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com C1300 PXO Supply voltage (Vs) Parameter Supply voltage Current consumption Min 4.75 Typ 5.0 Max. 5.25 15 20 40 Supply voltage Current consumption 3.135 3.3 3.465 6 8 12 16 40 75 100 Units VDC mA mA mA VDC mA mA mA mA mA mA mA ACMOS 1.0 to 14.90 MHZ ACMOS 15.0 TO 39.9 MHz ACMOS 40.0 TO 59.9 MHz ACMOS 60.0 TO 84.9 MHz ACMOS 85.0 to 125.0 MHz PECL/ LVPECL No load <200 MHz PECL/LVPECL No load > 200MHz ACMOS/TTL 1.0 to 23.9 MHZ ACMOS/TTL 24 to 49.9 MHz ACMOS/TTL 50 to 125.00 MHz SV033 Condition Ordering Code SV050 5 RF output Parameter Signal Load Signal Level (Vol) Signal Level (Voh) Rise and fall times for ACMOS (measured 10% to 90%) Duty cycle Signal Load Signal Level (Vol) Signal Level (Voh) Rise and fall times for TTL (measured 0.8V to 2.0V) Duty Cycle Signal Load Signal Level (Vol) Signal Level (Voh) Rise and fall times (measured @ 20% to 80%) Duty cycle LVPECL Jitter (rms) Period Jitter (pk-pk) 4.5 5 3 55 60 PECL/LVPECL 50 Vs -1.62 1000 600 55 10 0.5 40 45 40 TTL 10 0.5 VDC VDC ns ns % % Vs= 5.0V and 15pF load Vs= 5.0V and 15pF load 1.0 to 23.9 MHz 24 to 125 MHz @ 1.4V < 15 MHz @ 1.4V > 15 MHz RFP Into Vcc-2V or Thevenin Equivalent 4.5 3.0 10 6 3 55 60 Min Typ ACMOS 15 50 0.5 0.3 pF VDC VDC VDC VDC ns ns ns % % Vs= 5.0V and 15pF load Vs=3.3V and 15pF load Vs= 5.0V and 15pF load Vs=3.3V and 15pF load 1.0 to 23.9 MHz 24.0 to 79.9 MHz 80.0 to 125.0MHz @ 50% Vs< 15 MHz @ 50% Vs > 15 MHz RFT Max. Units Condition Ordering Code RFA 5 45 40 Vs- 1.025 45 VDC VDC ps ps % ps ps ps <100 MHz > 100 MHz @ 50% Vdd BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz 10,000 Samples - Rising edge Vectron International, LLC 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com C1300 PXO Additional parameters Screening Screening 6 Class B, MIL-PRF-55310 Vectron Verification 9 B V Output Enable Logic "0" input = Outputs disabled (Tri-state) Logic "1" or floating input = Outputs enabled) Logic "0" or floating input = Outputs enabled Logic "1" input = Outputs disabled (Tri-state) 2 Handling & processing note g ACMOS/TTL Output PECL/LVPECL Output Weight Processing & Packing Absolute Maximum Ratings Parameter Supply voltage (Vs) Operable temperature range Storage temperature range Min Typ Max. 7.0 7.0 +125 +125 Units V V C C Condition Vs=5.0VDC Vs=3.3VDC -55 -62 Enclosures Type A - ACMOS/TTL Package Codes: Code A1 E1 = Enable/Disable pin 1 X = N/C pin 1 T= Tinned J leads X= No Tinning 8 Type B - LVPECL Pin Length L N/A Code B1 E1=Enable/Disable pin 1 X = N/C pin 1 T= Tinned J leads X = No Tinning 8 Height H Height H Pin Length L Pin Connections 1 2 3 Enable/Disable or N/C Ground (case) Output 4 Supply Voltage 1 2 3 Enable/Disable or N/C N/C Ground (Case) Pin Connections 4 5 6 RF Output Complementary Output Supply Voltage Vectron International, LLC 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com C1300 Type C - PECL Code C1 E2 = Enable/Disable pin 2 X = N/C pin 2 T= Tinned J leads X = No Tinning 8 PXO Height H 1.880.178 Pin Length L N/A Pin Connections 1 2 3 N/C Enable/Disable or N/C Ground (Case) 4 5 6 RF Output Complemenatry Output Supply Voltage How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative. Stability Code C505 Model C1300 Example : C1300 Initial Accuracy Code Supply Voltage RF Output Code Code SV030 RFA Package Code A1 Enable/Disable Tinning T505 E1 T Step 2 The factory representative will then respond with a Vectron Part Number in the following Configuration: Model C1300 Package Code [Customer Specified Package Code] Dash Dash Number [Factory Generated 4 digit number] Typical P/N C1300A1-0001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) 3 Phase noise degrades increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. 6 Contact factory for other options. 7 Overall stabilities do not require an initial accuracy code. 8 Leads tinned IAW Vectron International standard procedure (GR-37409). 9 Vectron verification IAW Vectron International standard procedure (GR-37409). Vectron International, LLC 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com |
Price & Availability of C1300
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |